Epoxy resins Archive | ebalta Kunststoff GmbH https://ebalta.com/en/faq_category/epoxy-resins/ Ihr kompetenter Partner mit der nachhaltigen PU-Kunststofflösung im Formen- und Werkzeugbau. Thu, 19 May 2022 07:45:14 +0000 en-US hourly 1 https://wordpress.org/?v=7.1 Why does the surface of my epoxy laminate have a matte surface? https://ebalta.com/en/faqs/why-does-the-surface-of-my-epoxy-laminate-have-a-matte-surface/ https://ebalta.com/en/faqs/why-does-the-surface-of-my-epoxy-laminate-have-a-matte-surface/#respond Wed, 19 Jan 2022 08:38:00 +0000 http://wp.ebalta.com/?post_type=avada_faq&p=5543 A dull or sticky surface indicates excessive humidity during curing. Solve this issue by removing the affected layer and reapplying a new one at lower humidity.

Der Beitrag Why does the surface of my epoxy laminate have a matte surface? erschien zuerst auf ebalta Kunststoff GmbH.

]]>

A dull or sticky surface indicates excessive humidity during curing. Solve this issue by removing the affected layer and reapplying a new one at lower humidity.

Der Beitrag Why does the surface of my epoxy laminate have a matte surface? erschien zuerst auf ebalta Kunststoff GmbH.

]]> https://ebalta.com/en/faqs/why-does-the-surface-of-my-epoxy-laminate-have-a-matte-surface/feed/ 0 Why is my gelcoat or laminate still soft? https://ebalta.com/en/faqs/why-is-my-gelcoat-or-laminate-still-soft/ https://ebalta.com/en/faqs/why-is-my-gelcoat-or-laminate-still-soft/#respond Wed, 19 Jan 2022 08:34:05 +0000 http://wp.ebalta.com/?post_type=avada_faq&p=5541 The curing time of the epoxy resins depends strongly on the temperature. At low ambient temperatures (<18 ° C), the pot life and curing time are increased. At high ambient temperatures, complications may also occur as pot life and curing times decrease. We recommend ambient temperatures between 20 ° C and 25 ° C for [...]

Der Beitrag Why is my gelcoat or laminate still soft? erschien zuerst auf ebalta Kunststoff GmbH.

]]>

The curing time of the epoxy resins depends strongly on the temperature. At low ambient temperatures (<18 ° C), the pot life and curing time are increased. At high ambient temperatures, complications may also occur as pot life and curing times decrease. We recommend ambient temperatures between 20 ° C and 25 ° C for optimal results. Even if the ambient temperature drops always work with the mix ratio specified in the technical data sheet as the optimum properties are achieved at the recommended mix ratio.

Der Beitrag Why is my gelcoat or laminate still soft? erschien zuerst auf ebalta Kunststoff GmbH.

]]> https://ebalta.com/en/faqs/why-is-my-gelcoat-or-laminate-still-soft/feed/ 0 How much laminating resin do I need? https://ebalta.com/en/faqs/how-much-laminating-resin-do-i-need/ https://ebalta.com/en/faqs/how-much-laminating-resin-do-i-need/#respond Wed, 19 Jan 2022 08:31:00 +0000 http://wp.ebalta.com/?post_type=avada_faq&p=5537 As a rule keep in mind to take as much resin as you take glass fabric by weight. So per 100 g of glass fabric you will obtained 0.1 mm thickness. Example: 280 g glass fabric with almost 280 g resin / hardener mixture results in a laminate of approx. 0.3 mm. [...]

Der Beitrag How much laminating resin do I need? erschien zuerst auf ebalta Kunststoff GmbH.

]]>

As a rule keep in mind to take as much resin as you take glass fabric by weight. So per 100 g of glass fabric you will obtained 0.1 mm thickness. Example: 280 g glass fabric with almost 280 g resin / hardener mixture results in a laminate of approx. 0.3 mm.

Der Beitrag How much laminating resin do I need? erschien zuerst auf ebalta Kunststoff GmbH.

]]> https://ebalta.com/en/faqs/how-much-laminating-resin-do-i-need/feed/ 0